Makita LS1214FL 15 Amp 12-Inch Dual Bevel Compound Sliding Miter Saw with Laser and Fluorescent Light

Buy Cheap Makita LS1214FL 15 Amp 12-Inch Dual Bevel Compound Sliding Miter Saw with Laser and Fluorescent Light

Buy Low Price From Here Now
12", Dual Slide Compound Saw With Laser & Fluorescent Light, Built In Laser With Micro Fine Adjustments Clearly Indicates Line Of Cut, Independent Switch Allows Laser To Be Seen Independently Of Blade Rotation, Built In High Output Fluorescent Light Illuminates Work Area & Lasts 2,000 Hours On Average, Dual Steel Rails Supported By Linear Ball Bearings Ensure Stable, Accurate Cutting, Powerful, Direct Drive 15A Motor Never Slips Or Bogs Down, 9 Positive Stops At 15 Degree, 22.5 Degree, 30 Degree, 45 Degree Left Or Right & 0 Degree For The Most Common Miter Cuts, Additional Positive Stops At 33.9 Degree Left For Model LS1214FL, Electronic Speed Control Maintains Constant Speed Under Load, Soft Start Feature For Controlled Operation, Single Cast Aluminum Base Has Built In Wrench Storage For Operator Convenience, Long Slide Track & Wide Pivot Angle Allow Cross Cuts Up To 4 x 12 Material, Large Turn Base & Adjustable Pivot Fence Supports Larger Stock.
Readmore

Technical Details

- 12-inch dual bevel sliding compound saw with laser fluorescent light and soft start
- 15 amp; 3,200 rpm; cuts 52 degrees right and 47 degrees left with 9 positive stops at 0, 15, 22-1/2, 31.6, 45 degrees left or right
- Machined aluminum base; dual aluminum base; dual slide rails; carbide tip blade
- Includes saw, vertical vise, blade, wrench, triangular rule, 2 extension wings
- 20-1/2 by 28-1/2 by 28-1/4 inches; 52.9 pounds; 1-year warranty
See more technical details

 "This saw has lived up to all my expectations" 2009-12-06
By Dr. Codini (west virginia)
I bought this saw in '04 and immediately started flogging it. It came through with flying colors. I used it extensively in the construction of my post and beam/strawbale workshop. It has performed like a true champion, it even survived abuse by my hired helpers. A lesser saw would have thrown in the towel and gone home sobbing like a school girl. The Makita is one tough saw.

 "Seems high quality" 2009-08-31
By Jason Theriot (Houston, Tx)
After looking over all dual bevel compound sliding miter saws and their reviews this one seemed to be a better quality at a decent price. After receiving the saw and inspecting it I can say for sure that I believe it really is a higher quality saw than the ones I inspected at the big box stores. The laser is right on and can be changed to the right or left side in less than 2 seconds.

 "Makita LS1214FL 15 Amp 12-Inch Dual Bevel Compound Sliding Miter Saw with Laser and Fluorescent Light" 2009-06-23
By Fred L. Walterreit
This saw is great. If you do compound cutting this is a must have item. Set up is easy, adjustments are quick and the laser makes cutting so accurate. I love this saw.

 "An Amazing Saw & USA Made" 2009-03-30
By J. McDonald (Texas)
I was quite nervous spending this much on a saw. After installing crown, base, and chair rail in our whole 2,500 sq ft house, I have no regrets what so ever. I was able to complete the whole project in 1 day, w/o this saw it would of been much longer. This saw is the best there is. It's made in the USA which is an added bonus, however helps me understand why the quality is so great. Would recommend to anyone in the market. Trust me, spend the extra to get a good quality saw such as this one.

 "The BEST........" 2009-02-21
By Tool Addict (Cambridge, Idaho United States)
. Hi, this is a PRO SAW and I am a retired all phase carpenter. I have used many of these Makita saws by various employers and have owned a few also.. The bang for the buck is here and this saw is very user friendly for the weekend warrior that has intense remodel or wood working projects. The balance is sweet and you can feel the precision as your work with it, 1/64" for finish or cabinet work is not hard to hit the mark if your eyes are that accurate...... This is the top of the line and there are more expensive machines out there but the don't hold a candle to this model of Makita. I bought mine Feb 2008 at a steal here at Amazon, don't know if it was a pricing error or what but I shopped hard using search engines for a month..... The reason I got one more new one, and the only one I own now is I figured it would last me the rest of my life and I also purchased a new home in the country and all of my older out buildings had no trim, fascia or corner caps and I used my Makita to trim out every outbuilding I own.... Such a sweet saw I did over 1,000 linear feet in two days. To enhance this saw you may consider purchasing a chop saw bench, I found a transportable light weight wheeled collapsible one that weights 50 pounds with a single roller wheel and an open bridged support table of 119" for material support. I used a well known auction outlet for my portable saw table and scored that for 135 bux..... I have checked the stop locks on the degree of cut and doing that with a laser gauge and the factory quick locks for common cuts has repeatedly come in less that one half of a degree...





. BUY THIS SAW, you WON'T REGRET IT !


Images Product

Buy Makita LS1214FL 15 Amp 12-Inch Dual Bevel Compound Sliding Miter Saw with Laser and Fluorescent Light Now

Makita 5007MG Magnesium 7-1/4-Inch Circular Saw

Buy Cheap Makita 5007MG Magnesium 7-1/4-Inch Circular Saw

Buy Low Price From Here Now
Better Fit: Rubberized, ergonomically shaped handle. Conveniently Located Depth Settings: Oversized markings are easy to read. Powerful 15 AMP Motor: Jobsite proven to deliver 2,300 Watts Out. 56 deg Bevel Capacity: Positive stops at 45 deg and 22.5 deg. Built-In Dust Blower and Two LED Lights: Illuminate line of cut and identify that saw is connected to a power source. Magnesium Base and Guard: Durable design with less weight. Includes the Makita 5007MG 7 1/4" Magnesium Circular Saw.
Readmore

Technical Details

- Quick change from 0° to 45° and back using positive stops that are connected to easy-to-grip-levers
- Easy-to-read number and ruler markings on base and depth guide allow user to measure and follow cuts accurately
- Reinforced power cord withstands jobsite abuse
- Make one-handed adjustments using large, rubberized levers
- 1 year warranty
See more technical details

 "And another thing..." 2009-12-24
By Dennis (New York)
This saw is feature laden: powerful, deep cutting, cast alloy foot (not stamped,) it blows sawdust out of the way (kind of,) and all the many features that have been highlighted in all the other reviews.



I particularly like 1) that the LEDs stay on as long as the saw is plugged in, and 2) there is only one power switch, not the usual power switch that has to be freed by pushing and holding a trigger lock. In awkward positions, I have had a hard time holding the blade guard back and getting to push the safety button. So, be careful those of you who are upgrading from a `two-button' saw because the trigger is live. It took a little getting used to relying on the LEDs being lit to remind me that there was no safety and to keep my finger off the trigger when positioning the saw for cutting.

 "makita 5007MG saw" 2009-10-22
By James F. Taylor
Product arrived and saw performed as expected. The shipping box was too large with only one flimsy piece of paper as packing. The box was nearly destroyed since the item was heavy. The case for the saw was marred due to the thing being bounced around inside the shipping box.

 "Why this saw is better than its competitors" 2009-10-06
By Geoff Gurgel (Milwaukee WI)
I have used the current models of Dewalt, Hitachi and Milwaukee circular saws extensively, and this saw is hands down better than any of those. I use the saw every day,I have had this opportunity because my tools have been stolen a couple times(ouch)

The makita LXT impact and drill are so good that I thought I would try out this tool.

A list of what I noticed about this saw the first time I used it. I was astonished how quickly I noticed this stuff in use,

it seemed only all right when I checked it out at the store.



1. It has a silky smooth start up

2. It has excellent ergonomic grips

3. It is quieter and sounds better

4. It has an light to see your line, (much more useful than I thought it would be)

5. The adjustment levers function better and are easier to grab

6. Onboard storage for blade removal hex key

7. The angle adjustments and depth stop are easier to see.

8. It comes with the rip guide (much more useful that you would think)

9. The cord is installed to the body of the tool like they mean for it to stay and not fray

10. and does it ever cut smoothly,



it does not however have a electric brake, the 5007mga does though i believe.



This saw is on a different plane,

Thanks Makita engineers, you are making some amazing tools right now.

And other guys, come on seriously catch up.

 "greatest circular saw i've owned" 2009-07-13
By Debbie L. Needles (valdez, ak)
The Makita 5007MG Magnesium circular saw is everything it claims. It's light, acurate and powerful. The batteries don't last as long as I expected, but the charge time is fantastic.



Grandma Debbie

 "Rip fence is poorly designed and cheaply made" 2009-06-27
By Williamhassett (Virginia)
Had to Call Makita about this. The rip fense can NOT be used to rip measurements between 3" and 3-3/4". It took speaking to 3 people at Makita before finding a person that even had a clue as to what I was talking about. Had to go to Sears and buy a universal mount rip fence. Makita has still not called me back as promised. Very dissappointed with Makita on this one.


Images Product

Buy Makita 5007MG Magnesium 7-1/4-Inch Circular Saw Now

Bare-Tool Makita BSS610Z 18-Volt LXT Lithium-Ion Cordless 6-1/2-Inch Circular Saw (Tool Only, No Battery)

Buy Cheap Bare-Tool Makita BSS610Z 18-Volt LXT Lithium-Ion Cordless 6-1/2-Inch Circular Saw (Tool Only, No Battery)

Buy Low Price From Here Now
18-volt Lithium-Ion cordless 6-1/2-inch circular saw, 2 built In LED lights for more illuminated accurate work, compact design, only 13-5/8-inch long & weighs only 7.1-pounds, built in dust blower to enhance the line of sight, Makita built D35 high torque motor, heavy-gauge, precision machine base for smooth, accurate cutting and added Durability.
Readmore

Technical Details

- Makita-built motor delivers 3,700 RPM for faster cutting and ripping through wood
- Compact, ergonomic design at only 7.1 lbs. for reduced operator fatigue
- Includes features such as a built-in L.E.D. light to illuminate the work area, and a built-in dust blower to keep the line of cut free of debris
- Makita LXT Lithium-Ion battery and Energy Star rated 30-Minute Rapid Optimum Charger produces 430% total lifetime work with 2.5X more cycles
- 3-year warranty on tool
See more technical details

 "Makita saw" 2009-12-30
By Michele A. Johnson (New York)
Transaction was simple and worked well--delivery on time. Thought it would be in a box but not really a problem.

 "Quality built, a sweet little tool." 2009-11-27
By S. Brooks (San Francisco)
1st cordless circular saw and lovin' it. Super lightweight, thin saw kerf, powerful for what it's intended for. A great addition to the toolbox so you don't have to lug out the corded 15A wormdrive all the time.

 "Professional Carpenter" 2009-06-15
By G. Olson
My 35 year old skill, as were ALL worm drive saws used by true carpenters has the blade on the left. We used to call the saws with the blade on the right home owner 'side winders'. I still don't like leaning over to see the cut. With the blade on the left you can see the cut directly in front of you and your center of gravity is directly behind the cut. Thanks Makita for another great tool.

 "Warning - This is a LEFT HANDED tool." 2009-06-14
By Systems_Consultant (Eden Prairie, Mn United States)
This is a very nice portable saw, for a left-handed person! For that user, I would rate it at 4-5 stars.



Maybe I should be more generous than a 1-star rating since the picture clearly depicts a left-handed saw if you think about how you are going to use it. But come on... we're used to disclaimers on left-handed tools and I don't remember seeing any of the customery warnings on either the website or in the instructions for this saw. What's worse is that Makita doesn't seem to make a right-handed version of a 6 1/2" cordless saw! What is Makita thinking?



My AC powered Makita circular saw is the mirror image of this one, with the blade on the right hand side of the handle. Typically, when I use a circular saw, I place the piece being cut on a surface or set of sawhorses in front of me with the section to be cut off hanging off the right hand side. Then I can hold the workpiece steady with my left hand or knee while the large part of the sole plate of the saw stays on the work that is held to the table. The cut off piece falls away to the right. If you try to use this saw that way, with the saw blade on the left hand side of the handle, only the small sliver of the soleplate to the left of the blade is resting on the stable part of the workpiece. The large portion of the soleplate under the motor is resting on the part of the workpiece that will drop away when the cut is finished. This makes it very hard to control the saw as you finish the cut. In addition to ruining the cut, this useage could be considered dangerous.



Make sure you really want a left-handed saw before buying this one.

 "genesidol" 2009-03-01
By Richard J. Rollins (huntington, new york)
great saw with lots of balls, battery a little difficult to slide in and out otherwise very good.


Images Product

Buy Bare-Tool Makita BSS610Z 18-Volt LXT Lithium-Ion Cordless 6-1/2-Inch Circular Saw (Tool Only, No Battery) Now

Bare-Tool Makita BJV180Z 18-Volt LXT Lithium-Ion Cordless Jig Saw (Tool Only, No Battery)

Buy Cheap Bare-Tool Makita BJV180Z 18-Volt LXT Lithium-Ion Cordless Jig Saw (Tool Only, No Battery)

Buy Low Price From Here Now
The Makita BJV180Z is a 18V LXT Lithium-Ion Cordless Jig Saw Kit. It has 4-Pole position cut settings (3 Orbital and 1 Straight) for fast and efficient cutting in all applications. The Makita BJV180s large variable speed trigger allows for total cutting control (0-2600 SPM). Bare Tool Only - No Batteries and No Charger.
Readmore

Technical Details

- Makita-built variable speed motor delivers 0-2,600 strokes per minute for fast and efficient cutting
- 3 orbital settings plus straight cutting for use in a wide range of materials
- Includes features such as a built-in L.E.D. light to illuminate the work area and a "tool-less" blade change system for more productivity
- Makita LXT Lithium-Ion battery and Energy Star rated 30-Minute Rapid Optimum Charger produces 430% total lifetime work with 2.5X more cycles
- 3-year warranty on tool
See more technical details

 "Well made tool." 2010-01-07
By George Torok (Montreal, Canada)
I built the interior of a log cabin in Vermont this past summer. Did it all with just the 18 volt battery powered tools from Makita like this Jig saw. They all worked perfectly. They may not be the cheapest tools but they certainly are one of the best. This Jig Saw is solid and powerful and the battery last longer than it takes to charge one up.

 "makita 18v Li-ion cordless jigsaw" 2009-08-20
By C. troogstad (chicago il)
This was an addition to a 6 tool kit I purchased earlier. The saw is a welcome addition, it is easy to use and has plenty of power. I would like to see a speed limiting dial and the option of ordering with a rip fence. A good supplemental tool but anyone doing a lot of work should consider a good corded saw first, preferably a Bosch or Festool.

 "lxt jigsaw" 2009-03-07
By RufusB.Duck (Santa Rosa, Ca)
This is a very fine tool. The blade change is quick with no tools needed. There is a small led light and a blower to help you see the work. It is compact, even with the battery, and balances well. It comes with replaceable no-mar footplate and anti-splinter inserts. The only drawback is you still need an allan wrench to change the bevel angle of the sole plate.

 "Can you say handy?" 2009-01-11
By E. Fuller (Newnan, GA USA)
I really appreciate having this tool around. It's funny how many times I find myself using this for odd jobs or DIY projects. I use it more than I thought I would. I've cut metal hollow core doors, luan, PVC, small tree limbs (I know, poor use for this fine tool), etc. It is a bit pricy, but when you consider working without the constraint of wires, it's worth it. I've used it in my attic where there was no easy access to power. The LED was also quite useful there. To me it seems to drain the battery quickest out of my Makita LXT tools. Better have a spare.

 "excellent saw" 2008-12-02
By J.F (florida)
Im a craftman but trade and i use a jig saw almost everyday this is a good jig saw to own,it is lite and it cuts as good as any corded saw that i have ever use,and even better no cord to drag around.the quality is excellent.


Images Product

Buy Bare-Tool Makita BJV180Z 18-Volt LXT Lithium-Ion Cordless Jig Saw (Tool Only, No Battery) Now

bare-tool makita bss611z 18-volt lxt lithium-ion cordless 6-1/2-inch circular saw (tool only, no battery)

 

Buy Cheap Bare-Tool Makita BSS611Z 18-Volt LXT Lithium-Ion Cordless 6-1/2-Inch Circular Saw (Tool Only, No Battery)

 

Buy Low Price From Here Now

Makita built, D35 high torque motor delivers maximum power for cutting 2x material at 45-degrees with 50-degrees capacity; compact design at only 13-5/8-inchlength and weighs only 6.9-pounds ( with battery, not included )for less operator fatigue; ergonomic shape fits like a glove with even pressure and easy control; heavy-gauge, precision machined base for smooth, accurate cutting and added durability; two-piece armature and field along with externally accessible brushes for serviceability and longer motor life.

Readmore

 

Technical Details

- Makita-built motor delivers 3,700 RPM for faster cutting and ripping through wood

- Compact, ergonomic design at only 6.9 lbs. for reduced operator fatigue

- Designed with a large 2-1/4-inch cutting capacity at 90 degrees

- Makita LXT Lithium-Ion battery and Energy Star rated 30-Minute Rapid Optimum Charger produces 430% total lifetime work with 2.5X more cycles

- 3-year warranty on tool

See more technical details

 

 "Saw Works Great!" 2010-01-11

By Todd M. Fredette

I bought this saw as a "house-warming" gift to myself. I was going to need it for some work around the new place, it the comes in handy all the time. It's plently powerful even for pressure treated lumber. I rate it as a great purchase especially if you already have a collection of Makita LXT tools....

 

 "Cowboy Up Contracting" 2009-07-10

By Cowboy Up Contracting (Austin, TX)

Got this in the mail two days ago. I intended on using until I got my DeWalt runnig again (Ipe and remodeling, is hard on chordless saws). Well I put it through the paces today w/ the Makita blade that came on it none the less. And it is now the main tool and the DeWalt is the back up. I can't wait till I get the Freud Diablo blade on it to see what it can really do! Easy to use rip fence, good eurognomics, smooth running and powerful. A great chordless saw. Won't replace the corded Bosch but it rocks!

 

 "Not the saw I thought." 2009-02-04

By Joe Bosco

This is NOT the saw with the LED lights to guide your cuts. It is a stripped-down version of the saw I thought I was ordering. Poorer quality base & mitre guide as well. I'd like to return it but too much of a hassle.

 

 "Great Little Saw" 2009-02-02

By James Gage (Bothell, WA)

This is a great deal for the money if you already have the batteries and charger. This saw does not have the light which I miss and didn't come with a rip fence or a case; it's a light duty saw. If it's your only saw, you'll be sorry; it just doesn't have the torque of a corded saw and will choke in a slight bind while cutting plywood sheets or pressure treated 4x stock where the blade's burried; situations where even a homeowner corded saw will power through. If the blade is touching your work, the saw can't start. It just grunts coming up short of enough torque to start the cut. Anything but a perfect cutting angle in a perfectly straight cut will bind and stop the saw.

The trigger safety interlock is aggravating! I buy pro model corded saws to eliminate that dumb switch, but you need it in a battery saw if you store it with the battery installed; like everyone does. I have incredibly large hands and still find that trigger interlock a stretch to reach; ergonomically, it's in the wrong place for a comfortable grip. There is no charge level indication unless you put the battery on the charger; then you can only tell if it's > or < 80%.

All that said, I really do love the saw and find myself grabbing it first. The cut line on the table is dead on accurate; first saw I've ever had that was. It's light and fast and under normal conditions you can't outwork the batteries. I framed and sheathed two 48' gable ends and cut 2x4's and 5/8" plywood all day. I changed batteries twice and the battery was recharged well before the one in use died; I consider that completely acceptable run time.

I wouldn't expect to use it for long rips (straight or beveled) or for anything greater than 2x, but for anything short of full-on framing, I'll grab this saw out of my truck first; it's just awesome not to have to deal with cords and extension cords!

 

 "Great saw for the Money" 2009-01-08

By M. Castillo (Tulare CA)

This saw is much better than my Black and Decker Firestorm saw. I also think it is the same as the more expensive BSS610Z model. The owners manual is the same for both. The specs for both look identical except for a few ounces in weight. I did find one thing different.No blade brake.For the price still a good deal.





Images Product



Buy Bare-Tool Makita BSS611Z 18-Volt LXT Lithium-Ion Cordless 6-1/2-Inch Circular Saw (Tool Only, No Battery) Now