Makita 5477NB 15 Amp 7-1/4-Inch Hypoid Saw

Buy Cheap Makita 5477NB 15 Amp 7-1/4-Inch Hypoid Saw

Buy Low Price From Here Now
Makita's Hypoid Saw is the ideal tool for framers, builders, masons and contractors. The saw's high-quality, heat-treated hypoid gears deliver more power and greater surface contact than conventional worm drive gears. Oil bath technology and sealed gear housing means less maintenance and more productivity. Ergonomically designed rubberized grip improves control. Blade Diameter (in.): 7 1/4, Amps: 15, Volts: 115, Speed - No Load (RPM): 4,500, Bevel Capacity (deg): 50, Cutting Depth at 90deg (in.): 2 3/8, Cutting Depth at 45deg (in.): 1 3/4, Blade Location: Left, Depth Adjustment: Yes, Electric Brake: No, Spindle Lock: Yes, Arbor Size (in.): 5/8, Blade Included: Yes, Wrench Included: Yes, Case Included: No, Dimensions L x W x H (in.): 17 3/8 long
Readmore

Technical Details

- Efficient hypoid gears deliver more power and greater surface contact than conventional worm drive gears.
- Powerful 15 AMP motor for increased productivity.
- Oil bath technology and sealed gear housing for less maintenance.
- 0º - 51.5º bevel capacity with positive stops at 45º and 51.5º is ideal for truss and rafter cut-outs.
- High quality, heat treated hypoid gears are engineered for long lasting performance.
See more technical details

 "Best saw on the market" 2010-01-21
By Gr8archer (Portland, OR)
I have owned my current saw since 1992. I have had no issues ever! (Except changing the cord) Subcontractors will show up on the job with VERY HEAVY worm drive or cheap circular saws that are nearly impossible to see your cut line. I always keep a sharp blade mounted and blow the dust from armature quarterly when I check my cords for OSHA related problems.

This saw is so light, predictable and durable that I would never purchase another brand.




Images Product

Buy Makita 5477NB 15 Amp 7-1/4-Inch Hypoid Saw Now

Makita 5007MGA Magnesium 7-1/4-Inch Circular Saw

Buy Cheap Makita 5007MGA Magnesium 7-1/4-Inch Circular Saw

Buy Low Price From Here Now
Most refined saw with magnesium components for less weight, better balance and jobsite durability. With a proven 15 amp motor this saw is powerful enough to cut through the densest lumber. Two built-in LED lights illuminates the line of cut for increased accurancy. Includes: carbide tipped blade, hex blade wrench, rip fence and tool case.
Readmore

Technical Details

- Quick change from 0° to 45° and back using positive stops that are connected to easy-to-grip-levers
- Electric brake for maximum productivity
- Easy-to-read number and ruler markings on base and depth guide allow user to measure and follow cuts accurately
- Reinforced power cord withstands jobsite abuse
- 1 year warranty
See more technical details

 "great saw" 2010-04-04
By JJI
Have been using this saw for a few weeks now rebuilding my deck. Works great. Excellent view of the cut line making cuts very accurately. Ergonomically the hand grips feel very secure and it's very light and easy to handle. Electric brake was a must for me, work in an ER where we see a lot of saw injuries, amputations, etc. No major flaws I've identified yet. I don't want to speak too soon, but I haven't had much problems with kickbacks or binding so far, but I'm very careful about my cutting technique and the materials I'm cutting and I'm hoping that that will minimize kickbacks.

 "Nicely made tool." 2010-02-02
By D. Sweat (KS USA)
Well put together and tought oout design. Light weight and rugged. The electric brake is a safety must have for me. I don't have time to wait for the saw to stop spinning and make sure the guard didn't catch. Saw stops smooth and quick.

 "The Lexus of Circular Saws" 2010-01-18
By Steve_in_TN (TN USA)
I decided to upgrade from my 30 yr old B&D saw and almost bought the basic Milwaukee. Then I noticed they made one with a brake- which is a great idea. So I looked at the Milwaukee with brake. Then I noticed Makita also made one with a brake and indecision set in: I could not decide which brand to buy with the brake. To help with my decision I went to HD and looked at both- it then became an easy decision to buy the Makita 5007MGA even though it was slightly more expensive.



Looking at the Makita you can tell that the designers and engineers put some thought into it- it's not just a basic hammer-like power tool like the Milwaukee; instead the Makita has well thought out, almost sexy, "extra" detailed features for the user. The base is cast and has a nice thick lip on the blade side- the Milwaukee is stamped from ~.12" alum. All the levers on the Makita have nice rubber grips on them; the quick stops on the bevel adjustment on the Makita is also a great feature. Sure, you don't need these little features, but it shows that someone was thinking about more than mounting motor on a plate. The Milwaukee is the Chevy Malibu; the Makita is the Lexus; either will get the job done, but the Makita is a nicer tool. Oh, and this Lexus is unfortunately made in China, but the quality is perfect.



The saw has plenty of power and is as safe as any other saw so ignore the one bad review here wrt safety. The brake stops the blade in about half the time as my old B&D with no brake: ~3 seconds vs 6 (just counting off).



Negatives: As others have stated, the case is too small- you have to kink the cord at the strain relief which is not a good idea- the case needs to be 3" longer. The rip fence is too short to be of much use; this is ironic because the space for it in the case will accomodate a fence almost 2" longer. Fix those two things and it's perfect. It's odd that with all the detailed design put into the saw they missed glaringly obvious poor features on the case and fence. The case could also use some additional blade storage space although it's fine for at least two spare blades (all I have).

 "Design Flaw?" 2009-12-27
By R. Larson (Northern California)
I was going to buy this saw until I noticed that the rear left corner of the baseplate is chopped off. When you are using a guide to make a straight cut that part of the baseplate is quite useful to keep the cut straight as the blade exits the material. None of the pictures of the saw show the rear left corner. I went to a Makita parts website and looked at the drawing for the baseplate. I see that some other saw manufacturers that have cast versus machined baseplates are doing the same thing. Makita did the same thing on the 5008MGA, the 8.25" inch version of this product. I guess I'll have to buy dewalt or milwaukee instead. What a shame -- this is otherwise a really great saw. I'd rate it at 5 stars if the baseplate was just rectangular without the missing corner. Makes me wonder why they did that? To save a few pennies worth of magnesium? Makita reps I'd love to hear the reasoning for that decision!

 "Refined Circular Saw" 2009-10-14
By M. Rees
This is just a all around great circular saw. Starts relatively smooth, the ergonomics of the handles and levers are top tier, and the LED light/saw dust blower do a really good job of keeping you on the cut line. Adjustments are easy. The inclusion of the rip guide is a nice touch (other saws like some DeWalts expect you to pay extra for them). Very pleased w/ this purchase.


Images Product

Buy Makita 5007MGA Magnesium 7-1/4-Inch Circular Saw Now

Makita LS0714 Quad 10 Amp 7-1/2-Inch Sliding Compound Miter saw

Buy Cheap Makita LS0714 Quad 10 Amp 7-1/2-Inch Sliding Compound Miter saw

Buy Low Price From Here Now
Four steel poles with four linear ball bearings ensures stable, accurate and vibration-free cutting***Smooth easy slide system allows cross cuts up to 11-3/4" wide***Large aluminum turn base supports large stock for efficient cutting.
Readmore

Technical Details

- Four steel poles with four linear ball bearings ensures stable, accurate and vibration-free cutting
- Large dimensional lumber capacity: 2 x 12 at 90° and 2 x 8 at 45°
- Double sliding mechanism for lighter, more compact design; weighs only 27.6 lbs.
- Powerful 10 AMP motor delivers 6,000 RPM
- 9 positive stops at 15°, 22.5°, 30°, 45° right and 0° for the most common miter cuts
See more technical details

 "So glad I bought THIS one !" 2010-02-23
By B. Landers (NorCal)
Like some of you, I struggled about which miter saw to by for some time. On one hand, a simple non-sliding saw with a 10" or 12" inch blade seems to be alright, and the pricing is reasonable. On the other hand, what if I need to make wider cuts? Is the higher cost of a decent sliding miter saw worth it? In this case, damn straight. This "little" gem is exactly what this 1st time home owner / avid do-it-yourself-er remodel-er needed. For 99% of what I need to do - decking, raised garden beds, shelving, coping, trim, etc. this little power house is perfect. Just, my opinion by the way :)

 "Perfect punchlist saw" 2009-09-12
By Simon Mall
This saw has Displaced my 12" DW 718. WHY?

28 Lbs

28 Lbs

28 Lbs



that is the magic #

along with 2 x 12 cap

1/2 the dust created 1/16 dia blade only makes 1/2 the dust to begin with and almost complete collection when hooked to a vac.

The smoothest miter angle table of any saw EVER.

super easy to carry one handed,

Dead on accurate (the smaller the blade the less deflection).



The only concerns was it does not come with lock notch for the travel position, I speculate that this is so you don't lock it at 59 rather than 45



Also you must cut larger base and crown on the flat, for base this is almost easier once you use it a time or 2. the instructions come with a chart for setting crown on the flat for all angle 0-180.



As a professional remodeler who doesn't cut crown often this is the best take along saw you can buy, and it will be the only saw you use 97% of the time. so buy it and barrow your buddies behemoth on the rare occasion you need a bigger blade.

Craig

 "best finish saw period" 2009-01-18
By C. Behlke
Small, light, incredibly clean cuts. I had to adjust my bevel stops out of the box, but the small blade and a 6" engineer's square made it a snap. Smooth action and portable size have made it essential, my 10" sits at home while this one travels job to job. As a finish guy I rarely need to cut anything over 2" thick, I cut mouldings on the flat. This saw is perfect, you're crazy to consider anything else. Do yourself a favor if you buy this, build a small table with stock supports around 8" deep, the small supports on the saw allow wide material to roll off post cut.

 "Extremely light and compact but powerful!" 2007-01-12
By Ken Horn
This has become a very big part of my work, I have the Makita 12" compound but found that this is great for doing misc pick up work or smaller jobs when taking out the big dog is too much. It's really nice when you need to move alot from room to room as well as up and down stairs.

Cutting smaller trim on it is alot more comfortable as well compared to the 12". This saw has plenty of power, nice brake system and is actually nice to have side by side on the job with the other saws so you don't need to keep changing one saws angle all the time. It's just plain convenient to own!

 "An excellent saw for precise cutting" 2007-01-09
By V. Rokhlenko (NJ, USA)
This saw gives you cuts as smooth as glass in oak, pine and hard maple with almost no tearout on the bottom side. Since it has only 2" of vertical capacity I believe that its primary usage is in cabinet making. At least that is how I am using it. Its sliding mechanism is extremely smooth with no play. It gives you cuts up to 12" wide which are perfectly straight with no 'climbing' effect. Out of the box the blade was square to the table and the fence. I think that a table could have been a bit larger but my saw is mounted on a stand so it is a non-issue for me. Another possible detraction is that nobody(?) but Makita makes blades in 7-1/2" size but thus far the supplied blade proved (about 25 bucks if purchased separately) to be very good. Makita also could have provided two clamps for each side of the blade instead of just one. But I have yet to find a perfect tool...






Images Product

Buy Makita LS0714 Quad 10 Amp 7-1/2-Inch Sliding Compound Miter saw Now

Makita 5377MG Magnesium 7-1/4-Inch Hypoid Saw

Buy Cheap Makita 5377MG Magnesium 7-1/4-Inch Hypoid Saw

Buy Low Price From Here Now
Weight is a key factor with Hypoid (rear handle) saws, and with the extensive use of magnesium, the weight of Makitas new hypoid saw is reduced to a very competitive 13 pounds. The powerful motor employs dense windings which allowed Makita to make the overall package more compact and maneuverable.As with the 5277NB, it utilizes a precision-machined, maintenance free (never add oil) hypoid gearing system. Hypoid gears deliver more power than traditional worm drive gears found on other rear-handle saws. Includes the Makita 5377MG 7 1/4" Magnesium Hypoid Saw.
Readmore

Technical Details

- Large bevel capacity with positive stops at 22.5°, 45° and 51.5°.
- Oil bath technology is created with a built-in fan and sealed gear housing to ensure 100% oil surface coating
- High quality, heat treated hypoid steel gears do not prematurely wear like traditional bronze-alloy worm drive gears
- Reinforced power cord withstands jobsite abuse
- 1 year warranty
See more technical details

 "Nice saw, poor condition" 2009-06-26
By S. Maerz (Madison, WI United States)
This looked like a high quality tool but the one I received in the mail came in a banged up box, poorly packed, and had clearly been sitting on a shelf gathering dust for a while. When I saw it's condition I looked up the age of the saw by the serial number and found that it was over two years old. I returned it and got a full refund, then bought one locally instead.

 "An excellent alternative to the classic worm gear" 2009-05-12
By Mel D. (California)
I bought this saw to cut all the pressure treated lumber for my deck since my other tools (except handsaws) were not going to be up for the task. I picked this saw over the others available based on reviews from several woodworking sites. Every review site seemed to like a different saw but in general all agreed that the Skil was the best overall.



I passed on competitors models for several reasons: well reviewed Skil saws were too heavy and had overlooked faults that bothered me. The Dewalts, Boschs, etc all had quirky features. The Ridgid was excellent but had a diamond arbor which limited the blades you could use. The Makita was new and it replaced the outgoing model which was well received so I went with the 5377MG.



Pros:



- accurate cuts

- angle stop easy to set

- lightweight

- excellent ergonomics

- nice blade included (a Makita trademark)

- reinforced baseplate



Cons:



- no rip fence included

- startup kick

- heavier than a sidewinder

- slightly underpowered



I'm hesitant to call the saw underpowered because it's more powerful that my other equipment but I would bet that the heavier saws have more power when the saw is pushed hard.



Always get the black A-94530 blade. It's sharp, lasts a long time and is coated to prevent binding.



The Makita 5377MG uses a heavier duty rip fence that is gold colored. For some reason, Makita does not include a rip fence or securing screw with the 5377MG. These are the part numbers you'll need for that saw:



- Rip Fence 165153-3

- M6x15 screw 251858- 2



The screw is black and matched that older style Makita saws not the newer padded blue screws. Do not buy the skinny 164095-8 rip fence by mistake.



Note: if you buy this saw in the 5377MGX version, you'll receive a ballistic nylon blue carpenter's belt instead of a case. There is also a Makita 5477NB now available that is a stripped down version of this saw.

 "Great tool!" 2009-04-08
By John Zygmunt (Philadelphia, Pa)
Went out on a limb and bought this saw without even seeing it in person. Since then I have been doing some serious framing and I'm pleased with the results. But don't trust the presets for the depth gauge and bevels. Not 100 percent accurate.

 "quite manageable!!" 2009-03-18
By SEAN E RADD (Philly)
I was thinking that this was going to be too heavy for most of my applications, but it is NOT! You don't have to be The Hulk to use it. It cuts through wet lumber like butter, keeps a very straight line without the guide. It looks like a 57 dodge or chevy. It has the beam hanger (if you set it on ground it rolls over) which is awesome. I freaking love this thing! Nice thin kerf blade comes with it. I don't think I'd go with the other top brands for this, it is super light comparatively.

 "Really solidly built" 2009-03-06
By orangekay (San Francisco, CA United States)
I'd love to know what parts that other guy had magically fall off, because I can't find a single fit or finish flaw with mine. This thing is built like a tank, but doesn't weigh you down too badly. I'm a bit concerned about the longevity of the lower guard spring, but for right now, it works fine.



I chose this over the Bosch worm drive model purely because of the lack of need to drain and flush any oil out of the gearbox with kerosene, and I have no regrets. It ploughs right through wood, doesn't jump around when it starts up and has a really steady base. Not sure what else you'd need a circular saw to do.


Images Product

Buy Makita 5377MG Magnesium 7-1/4-Inch Hypoid Saw Now

Makita A-90009 MakBlade 7-1/4-Inch 16-Tooth ATB General Purpose Saw Blade with 5/8-Inch and Diamond Knockout Arbor

Buy Cheap Makita A-90009 MakBlade 7-1/4-Inch 16-Tooth ATB General Purpose Saw Blade with 5/8-Inch and Diamond Knockout Arbor

Buy Low Price From Here Now

Readmore

Technical Details

- 7-1/4" Carbide-Tipped Saw Blade for combination general purpose cutting.
- Individually hand-hammered by skilled saw technicians for guaranteed flatness and proper tension.
- Thin Kerf design for a lighter cutting load and eliminates wasted material.
- Each carbide tooth is expertly brazed to ensure long blade life.
- Fits Makita 5007FAK, 5007FK, 5007NB, 5007NBK, 5007NHK AND 5740NB circular saws.
See more technical details

Images Product

Buy Makita A-90009 MakBlade 7-1/4-Inch 16-Tooth ATB General Purpose Saw Blade with 5/8-Inch and Diamond Knockout Arbor Now

Makita 5007MG Magnesium 7-1/4-Inch Circular Saw

Buy Cheap Makita 5007MG Magnesium 7-1/4-Inch Circular Saw

Buy Low Price From Here Now
Better Fit: Rubberized, ergonomically shaped handle. Conveniently Located Depth Settings: Oversized markings are easy to read. Powerful 15 AMP Motor: Jobsite proven to deliver 2,300 Watts Out. 56 deg Bevel Capacity: Positive stops at 45 deg and 22.5 deg. Built-In Dust Blower and Two LED Lights: Illuminate line of cut and identify that saw is connected to a power source. Magnesium Base and Guard: Durable design with less weight. Includes the Makita 5007MG 7 1/4" Magnesium Circular Saw.
Readmore

Technical Details

- Quick change from 0° to 45° and back using positive stops that are connected to easy-to-grip-levers
- Easy-to-read number and ruler markings on base and depth guide allow user to measure and follow cuts accurately
- Reinforced power cord withstands jobsite abuse
- Make one-handed adjustments using large, rubberized levers
- 1 year warranty
See more technical details

 "And another thing..." 2009-12-24
By Dennis (New York)
This saw is feature laden: powerful, deep cutting, cast alloy foot (not stamped,) it blows sawdust out of the way (kind of,) and all the many features that have been highlighted in all the other reviews.



I particularly like 1) that the LEDs stay on as long as the saw is plugged in, and 2) there is only one power switch, not the usual power switch that has to be freed by pushing and holding a trigger lock. In awkward positions, I have had a hard time holding the blade guard back and getting to push the safety button. So, be careful those of you who are upgrading from a `two-button' saw because the trigger is live. It took a little getting used to relying on the LEDs being lit to remind me that there was no safety and to keep my finger off the trigger when positioning the saw for cutting.

 "makita 5007MG saw" 2009-10-22
By James F. Taylor
Product arrived and saw performed as expected. The shipping box was too large with only one flimsy piece of paper as packing. The box was nearly destroyed since the item was heavy. The case for the saw was marred due to the thing being bounced around inside the shipping box.

 "Why this saw is better than its competitors" 2009-10-06
By Geoff Gurgel (Milwaukee WI)
I have used the current models of Dewalt, Hitachi and Milwaukee circular saws extensively, and this saw is hands down better than any of those. I use the saw every day,I have had this opportunity because my tools have been stolen a couple times(ouch)

The makita LXT impact and drill are so good that I thought I would try out this tool.

A list of what I noticed about this saw the first time I used it. I was astonished how quickly I noticed this stuff in use,

it seemed only all right when I checked it out at the store.



1. It has a silky smooth start up

2. It has excellent ergonomic grips

3. It is quieter and sounds better

4. It has an light to see your line, (much more useful than I thought it would be)

5. The adjustment levers function better and are easier to grab

6. Onboard storage for blade removal hex key

7. The angle adjustments and depth stop are easier to see.

8. It comes with the rip guide (much more useful that you would think)

9. The cord is installed to the body of the tool like they mean for it to stay and not fray

10. and does it ever cut smoothly,



it does not however have a electric brake, the 5007mga does though i believe.



This saw is on a different plane,

Thanks Makita engineers, you are making some amazing tools right now.

And other guys, come on seriously catch up.

 "greatest circular saw i've owned" 2009-07-13
By Debbie L. Needles (valdez, ak)
The Makita 5007MG Magnesium circular saw is everything it claims. It's light, acurate and powerful. The batteries don't last as long as I expected, but the charge time is fantastic.



Grandma Debbie

 "Rip fence is poorly designed and cheaply made" 2009-06-27
By Williamhassett (Virginia)
Had to Call Makita about this. The rip fense can NOT be used to rip measurements between 3" and 3-3/4". It took speaking to 3 people at Makita before finding a person that even had a clue as to what I was talking about. Had to go to Sears and buy a universal mount rip fence. Makita has still not called me back as promised. Very dissappointed with Makita on this one.


Images Product

Buy Makita 5007MG Magnesium 7-1/4-Inch Circular Saw Now