Makita LS1214F 15 Amp 12-Inch Dual Bevel Sliding Compound Miter Saw with Fluorescent Light

Buy Cheap Makita LS1214F 15 Amp 12-Inch Dual Bevel Sliding Compound Miter Saw with Fluorescent Light

Buy Low Price From Here Now
Heres a formidable contender in the compound miter saw market with all the features you want in a high-end saw, plus one. We had high expectations for this saw, and we were not disappointed. Cutting is smooth, quiet, accurate and completely free of vibration, and the soft start is a nice feature. The 15-amp motor delivers 3,200 rpm, and electronic speed control maintains consistency under different loads. A common miter saw beef for us is a hard-to-read scale, but this ones large, clear and easy on the eyes, which we really appreciate. There are nine positive stops: 0 degrees, and left and right at 15, 22.5, 31.6 and 45 degrees, and bevels can be set from 0 to 45 degrees left and right. Capacities are great, too in the upright and center position, the saw will cut workpieces up to 4-1/2 inches high and 12-1/8 inches wide. A 45-degree left bevel still lets you cut stock 2-5/8 inches high and 12 inches wide, accommodating even the widest trim and moldings. The only thing wed change on this model is moving the rear bevel lever up front, but its not a big detractor. It does take a little muscle to set a bevel angle, but again, its not much of a mark against a saw that performs so beautifully. We like the vertical clamp on this saw; its quick to adjust and holds like a champ. Even the dust collection system, usually a notch above ineffective on most miter saws, is impressive, keeping the cutting line surprisingly clean. The thing we found coolest about this saw is a small detail, but one you dont see often: a built-in fluorescent light. It illuminates the workpiece cut line exactly where you want it, and its always right at your fingertips. Makita says the bulb will last some 2,000 hours, but we didnt stick around to check that out. Take care, though, as the bulb does get quite warm. There are a lot of compound miters on the market, but this one is definitely at the head of the class. Contractors and exacting woodworkers will love it.
Readmore

Technical Details

- 12-inch dual bevel sliding compound saw with fluorescent light and soft start
- 15 amp; 3,200 rpm; cuts 52 degrees right and 47 degrees left with 9 positive stops at 0, 15, 22-1/2, 31.6, 45 degrees left or right
- Machined aluminum base; dual aluminum base; dual slide rails; carbide tip blade
- Includes saw, vertical vise, blade, wrench, triangular rule, 2 extension wings
- 20-1/2 by 28-1/2 by 27-1/2 inches; 52-1/2 pounds; 1-year warranty
See more technical details

 "Over-rated saw for the money" 2009-09-16
By Matthew Abell (Poconos, PA)
My father-in-law has this saw and I have had the chance to put it through its paces (I own a Bosch 5412L -- a wonderful saw for finish carpentry). Unfortunately, this saw disappoints on many levels...



(1) the fence is so low that it does not support the work adequately, especially when cutting baseboards upright or crown molding in position

(2) when making a right-tilt bevel cut on the left side of a piece (a very common task), it is nearly impossible to hold the work safely and securely without your hand getting in the way of the motor housing

(3) the upright handle position can be awkward when making left-end cuts (especially for a righty like me)

(4) the twisting miter lock on the front takes about eight turns to lock securely

(5) weighs a ton, with no side handles to help carry it

(6) having the miter scale on the right makes no sense, as it gets blocked by the piece you're cutting

(7) supplied clamp has too many adjustable parts to set up quickly

(8) no venier micro-adjustment for "tweaking" angles to a 1/4-degree accuracy



Now the good points...

(1) smooth, clean cuts

(2) soft-starting

(3) relatively quiet



For the price, I think you can find a better saw with less compromises, such as the Bosch 5412L. For less money, the DeWalts offer great accuracy without all the bells and whistles. If price is no object, check out the Festool Kapex.

 "great saw" 2009-02-09
By Bri Bri (Montana)
As usual Makita has a great product. The factory settings are good but always a good idea to double check them. The pre-set bevel angles were good but the pointer arrow was off so a simple adjustment and wa la! The smooth start is a great feature as saws without it cause a little problem keeping the mark in sinc when the saw jumps after you press the trigger, so that's a great plus. Wouldn't own anything but a Makita! Thought about the 10 inch but really no more bulk or weight considering the extra depth capacity. You can't go wrong with this saw.

 "Best Mitre Saw" 2008-01-07
By E. R. Brant (Clanton, Al.)
Could not believe the quality of the cut.

Wish I had one like this ten years ago!!

 "Best Compact 12 inch Slider" 2007-08-11
By Matt (Indiana)
I definitely would highly rate this saw for the jobsite. The soft start feature is very helpful and the fluorescent light is a must have. There are so may times when I am in a basement with very little light and have to make some cuts to trim something out. The blade it comes with is a surprisingly excellent blade. The way this saw folds up to carry is by far the best of all the sliders we've used (ex: Bosch, Dewalt, Rigid, Hitachi). The only complaints I have is the bevel index in the table, which is easy to get used to, and it seems to hang a little when the blade is fully extended to make a long cut and the fact that you don't get a 60 degree bevel like the belted sliders. That extra bevel cappacity is nice to have doing stairs. I have saws with lasers and feel they are overrated anyone who uses a saw day to day will always use the blade, it's proven to me to be much more accurate. Have also used the Makita with the laser as well and like this one better.

 "First Makita purchase...oh well, maybe next time" 2007-04-10
By J. Ruhl (Lancaster, PA USA)
I read the reviews here at Amazon and decided to go with this model sliding compound saw. Unfortunately it wasn't the quality I expected. My saw arrived with a bent blade and bad linear bearings. I was going to send it back to Amazon but decided to opt for warranty work at a local authorized repair center (30 miles away). Amazon, for their part, did make a price adjustment along with a great instant discount at the beginning of the sale. I decided it was worth the hassle to have it fixed under warranty. I'm pleased with how Amazon helped with the post-sale problems. The repair center currently fixing my saw is also a big plus for Makita's reputation. That's why I'm giving this saw a 3-star review, it could have been a lot worse. Will I buy another Makita product? I'm not sure. Time will tell if this saw goes the distance after being fixed. I really believe I just happened to get the one that had problems.


Images Product

Buy Makita LS1214F 15 Amp 12-Inch Dual Bevel Sliding Compound Miter Saw with Fluorescent Light Now

Makita LS1013FL 15 Amp 10-Inch Dual Bevel Compound Sliding Miter Saw with Laser and Fluorescent Light

Buy Cheap Makita LS1013FL 15 Amp 10-Inch Dual Bevel Compound Sliding Miter Saw with Laser and Fluorescent Light

Buy Low Price From Here Now
If you're in the market for a miter saw, we always recommend considering a compound model. A compound miter saw is one on which the blade both tilts (bevels) and rotates (miters) to make miter cuts, allowing you to make compound-angle cuts essential for installing crown molding. This professional-duty machine tilts 45 degrees left and right, allowing you to make bevel cuts at both ends of a board without having to flip the board piece around. Its oversized aluminum worktable rotates 45 degrees to the left and 52 degrees to the right.

The saw has a built-in laser that clearly highlights cut line for quick, safe, accurate cuts. However, unlike most miter saws, the laser on this Makita model is mounted above the blade, not to the arbor. That means you don’t have to turn on the saw to activate the laser. Another nice feature is that the laser is independently switched, so you can turn it on or off whenever you’d like.

The saw carriage slides on two precision-ground steel rails that are fitted with ball bearing guides. The result is a vibration-free smooth-rolling saw that produces precise, consistent cuts, even at the outer limits of the slide mechanism. By the way, this 49-pound tool can crosscut a 2-by-12 and bevel-cut boards up to 3-5/8 inch thick. The LS1013L has a souped-up 15-amp, 3,700-rpm direct-drive motor that transfers cutting power to the blade much more efficiently than typical belt-driven saws.

One unique feature of the "FL" line of Makita saws is the built-in fluorescent work light. It illuminates the cut line exactly where you want it, and it’s always right at your fingertips. Makita says the bulb will last some 2,000 hours. Take care, though, as the bulb does get quite warm.

This versatile saw can handle a wide range of carpentry jobs from house framing and deck building to cabinetmaking and interior trim work. .-- Joseph Truini

What's in the box: The saw comes with a dust-collection bag, hold-down vise, two extension wings, 70-tooth carbide-tipped saw blade and blade wrench
Readmore

Technical Details

- Built-in high output fluorescent light illuminates work area and lasts 2000 hours on average
- Dual steel rails supported by linear ball bearings ensure stable, accurate cutting.
- Powerful direct drive 15 Amp motor never slips or bogs down
- 9 positive stops at 15, 22.5, 30, 45 degrees left or right for the most common miter cuts; additional positive stops at 33.9 left for Model LS1214FL.
- Electronic speed control maintains constant speed under load; soft start feature for controlled operation; 1-year warranty
See more technical details

 "Makita LS1013FL Compound Mitre Saw" 2010-03-28
By Dimwit (New Hampshire)
Seems to work very well. I'm no pro, just a weekend warrior. It's easy to use and well thought out. I'm glad I purchased it.

 "Great saw" 2010-03-21
By B. Hawkinson
Purchased saw a couple years ago but just getting around to writing a review. I'm not a professional carpenter just a DIYer and use the saw occasionally for small projects. Saw has a nice smooth start so it doesn't jump when you pull the trigger. By being a slider it is able to make a 90 degree cross cut of twelve inches which has come in handy. I got the saw at a great sale price from Amazon and delivery was fine.

 "Quiet and Smooth" 2009-05-17
By tool collector (west lawn Pa)
The motor is very smooth and quiet. It replaces a Ridgid LS1060 that was loud anmd coarse sounding!!! Love the laser and escpially the flouresent work light. Really nice blade included w/ the saw!!!

 "Makita compound slide saw" 2009-03-21
By Tom (Rockford, IL)
This is our second Makita slide saw, same model. The standard features along with it's portability make it an easy choice for our job trailer. We use it for anything from cutting framing lumber or fine trim to vinyl siding. Only downside to buying online is the shipping packaging needs to be re-thought. Ours arrived with the tilt handle broken and laying in the bottom of the box.will need to take care of that.

 "Go to Home Depot now!" 2009-03-05
By Brian Jeffrey Pearson (Chicago, IL)
I just picked this saw up at home depot. I have been wanting one for a long time. Amazon's price just went up from 479.99. Home Depot had the saw for 499.99 for a long time. I just happen to stop by this evening at it was marked 399.99. Awesome deal considering it is over 500 here on Amazon. Go there now, not sure how long it will be that price.


Images Product

Buy Makita LS1013FL 15 Amp 10-Inch Dual Bevel Compound Sliding Miter Saw with Laser and Fluorescent Light Now

Makita 2703X1 15 Amp 10-Inch Benchtop Table Saw with Fixed Stand

Buy Cheap Makita 2703X1 15 Amp 10-Inch Benchtop Table Saw with Fixed Stand

Buy Low Price From Here Now
Volts: 115, Amps: 15, Speed - No Load (RPM): 4,600, Table Dimensions W x L (in.): 27 x 22, Blade Diameter (in.): 10, Arbor Size (in.): 5/8, Cutting Depth at 90deg (in.): 3 9/16, Cutting Depth at 45deg (in.): 2 1/2
Readmore

Technical Details

- 10-inch table saw with stand and 27-by-22-inch table; cam-locking rip fence; electric brake
- 15 amp motor; 3-9/16-inch cut capacity; rack-and-pinion design bevel adjust
- PVC base, magnesium table, carbide blade
- Includes saw, stand, blade, rip fence, miter gauge, wrenches, manual
- 27 by 22 inches; 40 pounds; 1-year warranty
See more technical details

 "WARNING: Good saw, terrible miter slots" 2009-09-02
By R. L. Manugian (Olympia, WA USA)
I've been using this saw for about a year, and it holds up well and cuts well ... but the slots for miter bars are horrible. They're skinnier than the standard 3/4" slots on most saws, and not as deep, so they can't accommodate standard miter gauges and other accessories like featherboards. And since the table top is aluminum and not steel, you can't use magnetic featherboards, either. If you want to do something more than simple cuts where precision isn't important, my advice is to shop around for a saw with standard miter slots.

 "Excellent saw for its class" 2009-06-03
By Ted R (California)
I have owned this saw for over 10 years. It is used for wood working and home improvement stuff. the saw produces cuts that amaze me. The accuracy is superb. However I always use a top of the line Thin Kerf ripping blade. Thin Kerf is the only way to go on a saw of this size. When the blade gets worn out, it must be replaced. If you buy it, You will get more value than you paid for. Aside from the blade upgrade, I put some locking swivel casters on the fixed stand and it is super easy to move around my garage as needed. I also use a dust collector with it. What a health saver. When I used it without dust collection and without a mask, I got sick. so at the very least use a mask. With dust collection, you get almost no mess and a healthier work environment.

So, if this saw suits your available work space go for it. If you have ample space and a much larger budget, get something bigger. Keep in mind, this saw does its job most excellent, and I usually cut PADOUK And other hard Thick Stock up to 8 feet long.

 "Makita Table Saw" 2007-01-30
By Ken Kruse (Central Lake, MI)
Good product. Just what I expected. Very pleased with Amazon---will purchase items through them in the future.

 "Good saw however poor fence" 2006-02-23
By archerhunter (WI)
I used this saw in the past for jobsite work. It worked well. I have had no problems with it. The fence is definetly lacking for precise work, however for any rough work it works well. The included stand is fine for workshop use but otherwise would be a major pain to move around and is heavy. If you want to buy a saw for fine woodworking, I highly recommend you purchase a more expensive saw. For a portable, I would buy the dewalt model over this one. The major reason being the fence. My rating is for a portable saw for rougher work.

 "Makita Portable 10"" 2005-10-13
By Joseph R. Tarascio
A great saw, especially at the sale price. Makita always has produced durable tools and this is will be no exception. Little vibration with good depth for thicker stock. Hard to beat for a small portable unit. Buy the "table" to add ease in use.


Images Product

Buy Makita 2703X1 15 Amp 10-Inch Benchtop Table Saw with Fixed Stand Now

Makita 5477NB 15 Amp 7-1/4-Inch Hypoid Saw

Buy Cheap Makita 5477NB 15 Amp 7-1/4-Inch Hypoid Saw

Buy Low Price From Here Now
Makita's Hypoid Saw is the ideal tool for framers, builders, masons and contractors. The saw's high-quality, heat-treated hypoid gears deliver more power and greater surface contact than conventional worm drive gears. Oil bath technology and sealed gear housing means less maintenance and more productivity. Ergonomically designed rubberized grip improves control. Blade Diameter (in.): 7 1/4, Amps: 15, Volts: 115, Speed - No Load (RPM): 4,500, Bevel Capacity (deg): 50, Cutting Depth at 90deg (in.): 2 3/8, Cutting Depth at 45deg (in.): 1 3/4, Blade Location: Left, Depth Adjustment: Yes, Electric Brake: No, Spindle Lock: Yes, Arbor Size (in.): 5/8, Blade Included: Yes, Wrench Included: Yes, Case Included: No, Dimensions L x W x H (in.): 17 3/8 long
Readmore

Technical Details

- Efficient hypoid gears deliver more power and greater surface contact than conventional worm drive gears.
- Powerful 15 AMP motor for increased productivity.
- Oil bath technology and sealed gear housing for less maintenance.
- 0º - 51.5º bevel capacity with positive stops at 45º and 51.5º is ideal for truss and rafter cut-outs.
- High quality, heat treated hypoid gears are engineered for long lasting performance.
See more technical details

 "Best saw on the market" 2010-01-21
By Gr8archer (Portland, OR)
I have owned my current saw since 1992. I have had no issues ever! (Except changing the cord) Subcontractors will show up on the job with VERY HEAVY worm drive or cheap circular saws that are nearly impossible to see your cut line. I always keep a sharp blade mounted and blow the dust from armature quarterly when I check my cords for OSHA related problems.

This saw is so light, predictable and durable that I would never purchase another brand.




Images Product

Buy Makita 5477NB 15 Amp 7-1/4-Inch Hypoid Saw Now

Makita LS0714 Quad 10 Amp 7-1/2-Inch Sliding Compound Miter saw

Buy Cheap Makita LS0714 Quad 10 Amp 7-1/2-Inch Sliding Compound Miter saw

Buy Low Price From Here Now
Four steel poles with four linear ball bearings ensures stable, accurate and vibration-free cutting***Smooth easy slide system allows cross cuts up to 11-3/4" wide***Large aluminum turn base supports large stock for efficient cutting.
Readmore

Technical Details

- Four steel poles with four linear ball bearings ensures stable, accurate and vibration-free cutting
- Large dimensional lumber capacity: 2 x 12 at 90° and 2 x 8 at 45°
- Double sliding mechanism for lighter, more compact design; weighs only 27.6 lbs.
- Powerful 10 AMP motor delivers 6,000 RPM
- 9 positive stops at 15°, 22.5°, 30°, 45° right and 0° for the most common miter cuts
See more technical details

 "So glad I bought THIS one !" 2010-02-23
By B. Landers (NorCal)
Like some of you, I struggled about which miter saw to by for some time. On one hand, a simple non-sliding saw with a 10" or 12" inch blade seems to be alright, and the pricing is reasonable. On the other hand, what if I need to make wider cuts? Is the higher cost of a decent sliding miter saw worth it? In this case, damn straight. This "little" gem is exactly what this 1st time home owner / avid do-it-yourself-er remodel-er needed. For 99% of what I need to do - decking, raised garden beds, shelving, coping, trim, etc. this little power house is perfect. Just, my opinion by the way :)

 "Perfect punchlist saw" 2009-09-12
By Simon Mall
This saw has Displaced my 12" DW 718. WHY?

28 Lbs

28 Lbs

28 Lbs



that is the magic #

along with 2 x 12 cap

1/2 the dust created 1/16 dia blade only makes 1/2 the dust to begin with and almost complete collection when hooked to a vac.

The smoothest miter angle table of any saw EVER.

super easy to carry one handed,

Dead on accurate (the smaller the blade the less deflection).



The only concerns was it does not come with lock notch for the travel position, I speculate that this is so you don't lock it at 59 rather than 45



Also you must cut larger base and crown on the flat, for base this is almost easier once you use it a time or 2. the instructions come with a chart for setting crown on the flat for all angle 0-180.



As a professional remodeler who doesn't cut crown often this is the best take along saw you can buy, and it will be the only saw you use 97% of the time. so buy it and barrow your buddies behemoth on the rare occasion you need a bigger blade.

Craig

 "best finish saw period" 2009-01-18
By C. Behlke
Small, light, incredibly clean cuts. I had to adjust my bevel stops out of the box, but the small blade and a 6" engineer's square made it a snap. Smooth action and portable size have made it essential, my 10" sits at home while this one travels job to job. As a finish guy I rarely need to cut anything over 2" thick, I cut mouldings on the flat. This saw is perfect, you're crazy to consider anything else. Do yourself a favor if you buy this, build a small table with stock supports around 8" deep, the small supports on the saw allow wide material to roll off post cut.

 "Extremely light and compact but powerful!" 2007-01-12
By Ken Horn
This has become a very big part of my work, I have the Makita 12" compound but found that this is great for doing misc pick up work or smaller jobs when taking out the big dog is too much. It's really nice when you need to move alot from room to room as well as up and down stairs.

Cutting smaller trim on it is alot more comfortable as well compared to the 12". This saw has plenty of power, nice brake system and is actually nice to have side by side on the job with the other saws so you don't need to keep changing one saws angle all the time. It's just plain convenient to own!

 "An excellent saw for precise cutting" 2007-01-09
By V. Rokhlenko (NJ, USA)
This saw gives you cuts as smooth as glass in oak, pine and hard maple with almost no tearout on the bottom side. Since it has only 2" of vertical capacity I believe that its primary usage is in cabinet making. At least that is how I am using it. Its sliding mechanism is extremely smooth with no play. It gives you cuts up to 12" wide which are perfectly straight with no 'climbing' effect. Out of the box the blade was square to the table and the fence. I think that a table could have been a bit larger but my saw is mounted on a stand so it is a non-issue for me. Another possible detraction is that nobody(?) but Makita makes blades in 7-1/2" size but thus far the supplied blade proved (about 25 bucks if purchased separately) to be very good. Makita also could have provided two clamps for each side of the blade instead of just one. But I have yet to find a perfect tool...






Images Product

Buy Makita LS0714 Quad 10 Amp 7-1/2-Inch Sliding Compound Miter saw Now

Makita JR3050T 9 Amp Reciprocating Saw

Buy Cheap Makita JR3050T 9 Amp Reciprocating Saw

Buy Low Price From Here Now
Powerful 6 AMP motor for continuous operation. Swap blades easily with Tool-Less blade change. Variable speed control (0 - 2300 SPM) delivers precise cutting. Cordless: No, Amps: 6, Variable Speed: Yes, Strokes Per Minute (SPM): 0 - 2,300, Case Included: Yes
Readmore

Technical Details

- 9-amp reciprocating saw with variable speeds and 1-/18-inch-long stroke
- Blade and shoe changes are quick and painless with tool-less adjustment feature
- Ball and needle bearings extend tool life; externally accessible brushes allow easy maintenance
- Includes plastic case for convenient storage
- Measures 17-3/4-inches long, weighs 7.1-pounds; 1-year limited warranty
See more technical details

 "Blade lock defective. What happened Makita?!" 2010-01-06
By Tim E. (South East, PA)
Before any tool purchase, i always do my homework and research any potential purchase. So, when i was in the market for a recipro saw, Makita was right up there on my list. Makita's have good reviews on Amazon, among other places. So, their Reciprocating Saw seemed like a no-brainer for me. I already own a Makita double bevel sliding compound saw and am extremely impressed with the tool.



Amazon had one at my front door within record time (Kudo's Amazon!). Opened the box, plugged it in, and was happy for 5 minutes until i twisted the blade lock to "unlock" so i could insert the blade supplied by Makita. However, once in the "unlock" position, the locking component decided not to retract into the "locked" position. That's it. It wasn't moving. Surprised, after looking into it further, i decided it was smarter to get a replacement from Amazon then to tinker with the defective unit. When the replacement arrived, again, i opened the box and, to my surprise, (2 surprises now if your counting), the 2nd replacement had the same exact issue! The blade locking mechanism was already seized in the "unlock" position!!



I am both surprised and confused. Makita's a good, reliable name. I've read the reviews for the saw. My father has used Makita tools and recommended them to me. I own a of a beast miter saw made by Makita (which i love). What happened with Makita's Quality Contol process?! I would like to think it was a defect in the manufacturing process when Makita's made the batch and it won't happen again. However, it happen twice to me. Not a third time.



I am returning both initial and replacement saws and have already purchased a Milwaukee 12amp from the local HD. I had to put out a couple more dollars for the Milwaukee, but the Milwaukee has a 5 yr warranty, it's IS90000 certified, made in USA, and the blade lock component on the Milwaukee does what it's supposed to.



I'd like to forget this experience with Makita.

 "Kills Houses. Dead. (That's a good thing)" 2010-01-05
By L. Blackmore (Norwich, VT United States)
Reciprocating saws are awe-inspiring little toys. This on lives up to the Makita brand: solid like a rock, good grip, sturdy blade change mechanism, no nonsense control of speed, angle of attack and enough room to feel reasonably safe while working with it. This is a demolition tool, not intended for your fine cabinetry work; it will eat thru a steel pipe in 30 seconds and rip across a 2x4 in seconds (nails and all) whether you want it to or not.

 "Solidly Built, Works Great" 2008-07-19
By Timothy J. Mccarthy (Chicago)
Like another reviewer, I bought this based on Fine Homebuilding's test of reciprocating saws. It's my first recip, thought I've borrowed others to use before. This has a nice heft to it, is very comfortable to hold and operate, and works like a champ. The day after it arrived I used it to tear through some walls so I could gain access to the attic space behind them, and then reframe the opening. It went through the studs a little slower than some other saws, and the blade is only just long enough to reach through ½" drywall and the wide edge of a 2x4, so I had to make a couple of recuts. If I did rough framing or renovation for a living, I think I'd go with Makita's top of the line saw, which got Fine Homebuilding's best rating. But for DIY home renos, this is exactly what you need, and a great value.

 "Great Solid Reciprocating Saw" 2006-08-21
By Randy Godfrey (Bellingham, WA USA)
I bought this saw because of the "Best Value" rating that it received in the November 2005 issue of Fine Homebuilding. I am very satisfied with it! I especially love the quick blade change system. I have nothing but good to say about Makita tools. I own an arsenal of them. They are, without exception, solid, dependable, comfortable, easy to use and very durable. I am hoping that the qaulity of Makita tools remains high. As long as it is, I will continue to purchase them.


Images Product

Buy Makita JR3050T 9 Amp Reciprocating Saw Now

Makita LS1214FL 15 Amp 12-Inch Dual Bevel Compound Sliding Miter Saw with Laser and Fluorescent Light

Buy Cheap Makita LS1214FL 15 Amp 12-Inch Dual Bevel Compound Sliding Miter Saw with Laser and Fluorescent Light

Buy Low Price From Here Now
12", Dual Slide Compound Saw With Laser & Fluorescent Light, Built In Laser With Micro Fine Adjustments Clearly Indicates Line Of Cut, Independent Switch Allows Laser To Be Seen Independently Of Blade Rotation, Built In High Output Fluorescent Light Illuminates Work Area & Lasts 2,000 Hours On Average, Dual Steel Rails Supported By Linear Ball Bearings Ensure Stable, Accurate Cutting, Powerful, Direct Drive 15A Motor Never Slips Or Bogs Down, 9 Positive Stops At 15 Degree, 22.5 Degree, 30 Degree, 45 Degree Left Or Right & 0 Degree For The Most Common Miter Cuts, Additional Positive Stops At 33.9 Degree Left For Model LS1214FL, Electronic Speed Control Maintains Constant Speed Under Load, Soft Start Feature For Controlled Operation, Single Cast Aluminum Base Has Built In Wrench Storage For Operator Convenience, Long Slide Track & Wide Pivot Angle Allow Cross Cuts Up To 4 x 12 Material, Large Turn Base & Adjustable Pivot Fence Supports Larger Stock.
Readmore

Technical Details

- 12-inch dual bevel sliding compound saw with laser fluorescent light and soft start
- 15 amp; 3,200 rpm; cuts 52 degrees right and 47 degrees left with 9 positive stops at 0, 15, 22-1/2, 31.6, 45 degrees left or right
- Machined aluminum base; dual aluminum base; dual slide rails; carbide tip blade
- Includes saw, vertical vise, blade, wrench, triangular rule, 2 extension wings
- 20-1/2 by 28-1/2 by 28-1/4 inches; 52.9 pounds; 1-year warranty
See more technical details

 "This saw has lived up to all my expectations" 2009-12-06
By Dr. Codini (west virginia)
I bought this saw in '04 and immediately started flogging it. It came through with flying colors. I used it extensively in the construction of my post and beam/strawbale workshop. It has performed like a true champion, it even survived abuse by my hired helpers. A lesser saw would have thrown in the towel and gone home sobbing like a school girl. The Makita is one tough saw.

 "Seems high quality" 2009-08-31
By Jason Theriot (Houston, Tx)
After looking over all dual bevel compound sliding miter saws and their reviews this one seemed to be a better quality at a decent price. After receiving the saw and inspecting it I can say for sure that I believe it really is a higher quality saw than the ones I inspected at the big box stores. The laser is right on and can be changed to the right or left side in less than 2 seconds.

 "Makita LS1214FL 15 Amp 12-Inch Dual Bevel Compound Sliding Miter Saw with Laser and Fluorescent Light" 2009-06-23
By Fred L. Walterreit
This saw is great. If you do compound cutting this is a must have item. Set up is easy, adjustments are quick and the laser makes cutting so accurate. I love this saw.

 "An Amazing Saw & USA Made" 2009-03-30
By J. McDonald (Texas)
I was quite nervous spending this much on a saw. After installing crown, base, and chair rail in our whole 2,500 sq ft house, I have no regrets what so ever. I was able to complete the whole project in 1 day, w/o this saw it would of been much longer. This saw is the best there is. It's made in the USA which is an added bonus, however helps me understand why the quality is so great. Would recommend to anyone in the market. Trust me, spend the extra to get a good quality saw such as this one.

 "The BEST........" 2009-02-21
By Tool Addict (Cambridge, Idaho United States)
. Hi, this is a PRO SAW and I am a retired all phase carpenter. I have used many of these Makita saws by various employers and have owned a few also.. The bang for the buck is here and this saw is very user friendly for the weekend warrior that has intense remodel or wood working projects. The balance is sweet and you can feel the precision as your work with it, 1/64" for finish or cabinet work is not hard to hit the mark if your eyes are that accurate...... This is the top of the line and there are more expensive machines out there but the don't hold a candle to this model of Makita. I bought mine Feb 2008 at a steal here at Amazon, don't know if it was a pricing error or what but I shopped hard using search engines for a month..... The reason I got one more new one, and the only one I own now is I figured it would last me the rest of my life and I also purchased a new home in the country and all of my older out buildings had no trim, fascia or corner caps and I used my Makita to trim out every outbuilding I own.... Such a sweet saw I did over 1,000 linear feet in two days. To enhance this saw you may consider purchasing a chop saw bench, I found a transportable light weight wheeled collapsible one that weights 50 pounds with a single roller wheel and an open bridged support table of 119" for material support. I used a well known auction outlet for my portable saw table and scored that for 135 bux..... I have checked the stop locks on the degree of cut and doing that with a laser gauge and the factory quick locks for common cuts has repeatedly come in less that one half of a degree...





. BUY THIS SAW, you WON'T REGRET IT !


Images Product

Buy Makita LS1214FL 15 Amp 12-Inch Dual Bevel Compound Sliding Miter Saw with Laser and Fluorescent Light Now