Makita LS1040 10-Inch Compound Miter saw

Buy Cheap Makita LS1040 10-Inch Compound Miter saw

Buy Low Price From Here Now
A favorite on job sites, Makita's 10-inch compound miter saw has a highly dedicated following. Even though it's extremely portable (at 24.2 pounds), Makita's saw also boasts a super sturdy dual-post pivoting arm. A pivot fence adjusts for supporting large stock and flips back for bevel cuts. The saw bevels left up to 45 degrees and miters 45 degrees left and up to 52 degrees right. There's no lack of power here, either: a 15 amp motor spins the blade, plus there's an electric brake that saves you time between cuts. There's also a shaft lock that makes changing blades quick and easy. The miter has a smooth-action swivel, but the lock is of the older screw-handle design that's a little more time-consuming than the newer (and more expensive) cam-lock designs. This Makita also lacks a soft-start mechanism, so it does jump a bit when the motor first engages; some users swear by a soft start, but we think a saw can still be a high-quality saw without one. Makita's saw has a vertical grip design with a thumb-activated safety switch and a paddle trigger, and while the vertical design might be slightly less ergonomic than the horizontal D-handle, it does allow you to use the saw comfortably with either hand. And the paddle grip makes squeezing the trigger easy no matter how you're holding the handle. Our verdict: it's a solid saw. -- Jon Groebner

Choosing a Miter Saw
Miter saws are versatile tools that have become a mainstay of workshops everywhere. These powerful saws make angled cuts by pulling a circular blade down onto a workpiece with a short, controlled plunge. It might appear that miter saws are infinitely complex and varied, but there are only three general types. The type you choose will depend on your woodworking needs.

Basic Miter Saws
Basic miter saws are the least versatile off the three major variations, but they’re a great starting point for novice do-it-yourselfers. These models typically adjust for miter cuts only, so consider upgrading if you need to do more than that.

Compound miter saws are easier to use than basic miter saws because you can place your stock flat for cutting, and they adjust simultaneously for miter and bevel cuts. A compound miter saw is great for jobs that feature stock that's not very tall or wide, such as door and window trim or picture frames.

Sliding Compound Miter Saws
Sliding compound miter saws are the most versatile of the available models. They have a motor and blade assembly that's mounted on a moveable arm to accommodate longer, wider workpieces. For smaller pieces, the saw performs like an ordinary fixed-head model. On some models, the blade can only pivot in one direction, but on a dual sliding compound miter saw, the blade can tilt to the right or left.

Important Features at a Glance
Though models will vary by manufacturer and design, these are a few of the more commonly found features that you might want to keep in mind.

• Electric brake: Reverses the flow of electricity when the saw's trigger is released. This is an important safety feature that slows the blade quickly in case of emergency.
• Blade guard: Most miter saws have self-retracting guards that withdraw when the saw is lowered for use, and reappear when it is raised.
• Laser guide: Gives a precise visual line where the cut will occur on your workpiece.
• Dust bag: Helps collect sawdust for a clearer, more tidy cutting area.
• Shaft lock: Immobilizes the shaft and blade for quicker, easier blade changes.
• Table extensions: Mount on either side of the saw to help balance longer workpieces.

Miter Saw Blades
Miter saw blades come in a variety of different sizes, grades, and materials, but there are three main types: steel, high-speed steel, and carbide-tipped blades.

• Steel: Inexpensive and good for cutting soft woods or plywoods. Sharpness diminishes quickly in tougher materials.
• High-Speed Steel: More rugged than steel blades, and great for cutting harder woods.
• Carbide-Tipped: More expensive than other blades but much more durable. Maintain sharpness over a longer period.
  Readmore

  Technical Details

  - Features powerful 15 amp motor and dual post compound pivoting arm
  - Provides a large capability with cuts 52 degrees right and 47 degrees left with 9 positive stops at 15, 22-1/2, 30, 45 degrees left or right and 0 degrees
  - Durably designed with a machined aluminum base, dual aluminum base, dual slide rails and a carbide tip blade
  - Saw includes vertical vise, blade, wrench and triangular rule
  - Covered by 1-Year warranty
  See more technical details
  
  
   "needs work" 2009-11-20
  By Ruby James (bay area)
  This saw out of the box WILL NOT CUT A 2X6 AT 90 DEGREES NOR BEVEL A 2X6 AT 90 DEGREES. With some filing of the right hand fence top I could get the saw to lower itself and cut a 2x6 at 90 degrees by 90 degrees. Beveling at 45 degrees by 90 degrees was impossible. The blade gruard, nut etc. prevents the blade from penetrating all the way through the wood. Otherwise it is a light weight and durable machine. It bewilders me why Makita would make a 10" saw with a 15 amp motor that can't cut a 2x6.
  
  
  
   "Not sliding" 2009-10-21
  By Michael Gonzalez
  I should have purchased a sliding compound mitre saw instead of a non-sliding one. They are so much more useful for cutting plywood sheets etc.
  
  
  
   "One of the best small miter saws." 2009-08-16
  By Kevin A. Straight (Los Angeles, CA)
  A few years ago I worked in the cabinet shop of a custom motor-coach factory. We had about 12 of these 10" Makita Saws as well as a few larger sliding saws of various brands. We used them all day long to cut moldings and secondary wood to assemble cabinets, and never had a lick of trouble. Out on the main line, they even used the same saw with a carbide blade to cut aluminum extrusions for coach bodies.
  
  
  
  When they finally started wearing out (after about 5 years of 10 hour work shifts) management replaced them with cheap Delta saws which where not nearly as tough.
  
  
  
  I have been in the wood trades for several years and used saws of every major brand. If I was going to buy a small miter saw, the Makita would probably be my first choice.
  
  
  
   "Ho Hum, just another solid product from Makita!" 2009-06-19
  By Warren W. Wiley (Ottertail)
  Let me make this short: this is all the miter saw 95% of us need. You can buy bigger, fancier more powerful saws with advanced features but this is all you really need unless you're a full time Pro who does trim and molding etc. all day long.
  
  It has a liitle "kick" at start up but when you make the cut it is so quick and so clean you forget it. In fact....I LIKE that little start up boost!
  
  This is a well made, well thought out tool and looks like it will last a long time. If its like my other Makita tools I'm sure it will.
  
  
  
   "good saw for the money" 2009-04-14
  By Robert Hoffman (Fleetwood PA. USA)
  I purchaced this saw and it turned out to be a real good buy. I use it all the time and it works well every time. I would recomend it to others.
  
  
  Images Product
  
  Buy Makita LS1040 10-Inch Compound Miter saw Now